| Source / Type | Semiconductor laser diode | Full‑colour RGB laser projector |
| Suitability | Laser graphics displays | Indoor aerial beam shows | Audience scanning shows (*variable beam size may help to fulfil safety criteria*) |
| System control | Pangolin FB4‑SK (Ethernet, ArtNet, DMX, ILDA) – PC, lighting console or Autoplay |
| Compliance | EN 60825‑1, FDA, TUV Laser Safety |
| Ingress Protection Rating | IP20 |
| Weight | 11.6 kg |
| Size (W×H×D) | 339 × 168 × 382 mm |
| Guaranteed optical output | 6.75 Watts |
| Installed modules (R | G | B)[W] | 2 W | 2.5 W | 3 W * |
| Wavelengths (±5 nm) | 637 nm | 525 nm | 445 nm |
| Beam size | 4 × 4 mm |
| Beam divergence | < 0.6 mrad ** (applies when Beam Brush is not active) |
| Analogue modulation | 100 kHz |
| X‑Y scanners | ScannerMAX 506 Compact, 40 kpps @ 8°, max scanning angle 60° both axes |
| Power requirements | 100–240 V, 50–60 Hz, Neutrik powerCON TRUE1 |
| Max power consumption | 340 VA |
| Operating temperature | 5–35 °C (‑20 to +35 °C with Monsoon enclosure + AC) |
| Included in the set | Heavy‑duty flight case; AC power cable (1.5 m); 10 m Ethernet cable; 10 m E‑STOP remote cable; safety keys; interlock bypass (USA); USB with user manual; QC certificate |
| Software | Pangolin QuickShow (free download) |
| Hardware features | FB4 interface: per‑colour power control; X & Y axes invert; beam size & position control; scanning overload protection; Colour Balance mode |
| Laser safety features | Keyed interlock; emission delay; magnetic interlock; scan‑fail safety; fast shutter (<20 ms); aperture masking plate; emergency STOP remote with manual restart |
| Note A | Due to Advanced Optical Correction technology used in Kvant systems, the real power output of each laser module installed within the system may slightly differ from its specification. This doesn't affect the total guaranteed power output of the system. |
| Note B | The beam divergence total is calculated as an average arithmetic value of all individual colours. The divergence of each colour is calculated as:
1. FWHM of the beam cross-section for round beams, or
2. The arithmetic average of the beam's horizontal and vertical divergence for all rectangular beams. |
